User manual

BEETLE /M-II plus (BOS) User Manual 3
 The lithium battery must be disposed of in accordance with local
regulations for special waste. In case of an improper change of the
lithium battery it exist an explosion risk.
 Your BEETLE system is the result of modern technical innovation. So
please see for according structural and technical surroundings to guar-
antee a faultless and efficient work of your BEETLE. Therefore, you
should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This
kind of electricity system is known as TN-S network. Do not use PEN
conductors!
Please also observe the recommendations of the norm DIN VDE 0100,
Part 540, Appendix C2 as well as EN50174-2, §5.4.3.Thus you can help
to avoid possible mal functions.
 You can connect or disconnect USB devices during operation of your
BEETLE, provided that these devices comply with the specifications
according to usb.org.
 Other peripheral devices with higher power requirement (such as
PoweredUSB printer) should be connected to or disconnected from your
BEETLE system only after the BEETLE has been switched off.
 If you replace a storage medium, make sure that you only use the stor-
age medium recommended or approved by Wincor Nixdorf.