Manualshelf

User manual

ManualsBrandsWincor Nixdorf ManualsComputer equipmentBEETLE AT COM Board
12345678910
2 BEETLE /M-II plus (BOS) User Manual
Safety Notes
The device may only be repaired by authorized qualified
personnel. Unauthorized opening of the device and
inexpertly carried-out repairs may not only seriously jeo-
par-dize the safety of the user, but also cancel all war-
ranty and liability agreements.
Expansion cards with electrostatically sensitive devices
(ESD) can be marked with this sticker.
Important Notes
The modular POS system BEETLE /M-II plus (BOS) conforms to the current
safety standards for data processing equipment.
If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device must be absolutely dry be-
fore being put into service; an acclimatization period of at least two
hours must therefore be observed.
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the device
and the grounded-contact power socket are easily accessible.
To disconnect the device from the supply voltage completely, switch off
the device and disconnect the power plug of the power supply.
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
The ventilation slots of the power supply must remain unobstructed to
ensure sufficient ventilation of the equipment. If the equipment is to be
fitted, you must ensure that the specified minimum distances are main-
tained and constant ventilation is provided.
Never plug in or unplug data communication lines during thunderstorms.
Protect devices from vibrations, dust, moisture and heat.
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched off
immediately, the power plug disconnected and the Customer Service of
Wincor Nixdorf or your dealer must be notified.