User manual

24 BEETLE /M-II plus (BOS) User Manual
Disconnecting Cables
Never unplug a cable by pulling on the cable; always take direct hold of the
plug itself. Follow the procedure below when disconnecting cables:
 Turn off all power and equipment switches.
 Unplug all power plugs from the grounded-contact power sockets.
 Unplug all data communication cables from the sockets of the data net-
works.
 Unplug all cables from the devices.
With MINI-DIN plugs (Wincor Nixdorf), the
plug remains inserted until released.
Pull the plastic covering from the connecting
socket with your thumb. The lock is released.
The metal of the plug is visible.
RJ12 plugs lock in when you insert them.
To release them push the latch under the
plug to the top.
You loosen the USB-A- connector by pushing
the covering of the connector.
The powered USB connector is disengaged
by pressing the spring that is marked by an
arrow.