User manual

BEETLE /M-II plus (BOS) User Manual 23
RJ45 (LAN)
The system can be connected to a network (LAN) from the back panel.
LEDs
lights green
"network connection"
Left LED
flashs green
Date transfer
out
10 MBit
lights green 100 MBit
right LED
lights orange 1000 MBit
Only connect shielded LAN cables (CAT5 or CATe for 1000 MBit)
as these offer a better protection in case of interferences in a
network.
D- Sub, 15 pin (VGA), or DVI or PLINK TFT
If a CRT adapter is installed, you can connect a monitor to the BEETLE /M-II
plus (BOS) via the 15-pin D-sub jack on the CRT adapter.
A LCD screen can be connected alternatively if a TFT adapter is installed.
Optional there is a DVI-I jack available to connect a high resolution TFT
monitor. The DVI jack has a dual link contact, enabling the transmission of
video signals with a max. resolution of 2560×1600 pixels/60 hz. DVI-I trans-
fers digital and analogue image data.
The COM1 or COM2* interface is without effect if the onboard TFT
adapter with touch screen function is installed. In this case the inter-
face is not available for other peripherals.