User manual

18 BEETLE /M-II plus (BOS) User Manual
The power pack must be removed or replaced by authorized quali-
fied personnel only. Only replace power packs released by Wincor
Nixdorf.
To disconnect the device from the supply voltage completely, switch
off the device and disconnect the power plug.
DC24V (Modular Printer)
Appropriate POS printers can be connected via the low-voltage jack 24V,
max. 3A via non-UPS. A connecting cable with a HOSIDEN plug is required
for this.
Connect only cables to the 24V connector which are marked with
DP-1 or DP-2.
Do not connect the HOSIDEN plug when the system is turned on,
this can lead to an automatical reboot of the system.
RJ12 (CASHDR)
The power supply unit has one RJ12 socket for connecting a cash drawer.
Make sure that the connector is plugged firmly into the socket to prevent
malfunctioning. RJ12 plugs lock in when you insert them. Power is supplied
to the cash drawer via this socket, P24V +5% / -15%.
Connecting daisy chained cash drawers and 12V OEM-drawers is
prohibited!
Connect cash drawers only (no telephon).
Power Connector
This connector provides the power. Connect the according end of the power
cable to this port and the other end to the power socket.
Pull the mains plug to power-off the device.