User manual

BEETLE /M-II plus (BOS) User Manual 17
Connector Panel
Power Supply
The power supply can be connected to all conventional power supply
networks. It automatically adjusts itself to the particular voltage and is
fan-cooled.
The Power Supply Unit (PSU) carries the 80plus Bronze certificate.
So, less energy is needed and less noise is generated as the fan is
much lesser activated with a low revolution speed.

DC24V (printer)

RJ12 (cashdrawer socket)

Power connector
At the front side of the box you will find the ON button which will turn on the
system.
The system is automatically switched off, when the operating system is shut
down. Pushing (approx. 5 seconds) the ON button at any time will shut down
the system. The proper function of the On button is defined by the settings of
the operating system and the BIOS.
The power cord receptacle and the power socket for the printer are
located on the back of the BEETLE system.


