User manual

BEETLE /M-II plus (BOS) User Manual 11
Mounting the Cable Cover
Before mounting the optional cable cover, you should first remove the cable
openings where necessary. This depends on the cables which you wish to
lay.
Tools are not required as the plastic parts can be removed by hand.
Cabling Of the BEETLE /M-II plus (BOS)
Follow the steps below in the order given when installing devices:
 The cable cover must be removed, if present.
 Plug one end of the power cable into the socket of the
BEETLE /M-II plus (BOS).
 Plug the other end of the power cable into the main power supply.
Always make sure that all power plugs from the grounded-contact
power sockets are unplugged.