User manual

BEETLE /M-II plus (BOS) User Manual 5
Care Of BEETLE /M-II plus (BOS)
Clean your BEETLE /M-II plus (BOS) at regular intervals with a suitable plas-
tic-surface cleaner which can be ordered from Wincor Nixdorf International
GmbH. Make sure that the power plug is disconnected and that no liquid
finds its way into the device.
Recycling the BEETLE /M-II plus (BOS)
Environmental protection does not begin when the time has come to dispose
of the BEETLE; it be gins with the manufacturer. This product was designed
according to our internal norm “Environmental conscious product design and
development”.
The modular BEETLE /M-II plus (BOS) system is manufactured without the
use of CFCs and CCHS and is produced mainly from reusable components
and materials.
The processed plastics can, for the most part, be recycled. Even the pre-
cious metals can be recovered, thus saving energy and costly raw materials.
Please do not stick labels onto plastic case parts. This would help us to
reuse components and material.
You can protect our environment by only switching on your equipment when
it is actually needed. If possible, even avoid the stand-by-mode as this
wastes energy, too. Also switch your equipment off when you take a longer
break or finish your work.
At this time, there are still some parts that are not reusable. Wincor Nixdorf
International GmbH guarantees the environmentally safe disposal of these
parts in a Recycling Center, which is certified pursuant to ISO 9001 and
ISO 14001.
So don’t discard your BEETLE /M-II plus (BOS)system on the garbage when
it has served its time, but take advantage of the environmentally smart, up-
to-date recycling methods!
Please contact your competent branch or the Recycling Center Paderborn
(for European countries) for information on how to return and reuse devices
and disposable materials under the following mail address.
Email: [e-mail]
or on the internet.
We look for ward to your mail.