User manual

BA83 User Manual
43
Push the reader beneath
the bracket, so that the
screws fit into the keyhole
and the holder lays under
the clamps.
Tighten the screws.
Pass the cable through the
cable guidance and connect
it to the USB interface. If a
HUB is available you should
use one of it's USB
interfaces. Do not release
the cable loop.
Attach the cover of the
swipe card reader and push
it to the monitor until it
engages.
Flap the loudspeaker's bezel upwards and snap it into place.
Mount the monitor's stand.
clamp
clamp