User manual

42
BA83 User Manual
Attach the cover of the Swipe Card Reader (1) and push it to the monitor
until it engages (2).
Flap the loudspeaker's bezel upwards and snap it into place.
Mount the monitor's stand.
Mounting On the Left Side
Proceed as described above ("Mounting on the right side"). Disconnect the
cable to connect it to the USB interface at the rear side of the monitor.
Push the bracket of the Reader into the opening of the housing, so that the
holes are lying upon each other. Then tighten it.
Pass the cable into the ca-
ble guidance of the Swipe
Card Reader and connect it.
②
①