User manual

24
BA83 User Manual
Connection Bezel
The following sockets are located under the bezel of the screen:
USB- A PoweredUSB DC Power Jack/12V DVI- I RJ10 (RMT)
(12V)
USB- A
For external peripherals, can be used for MSR
PoweredUSB Data transfer and/or current supply for the screen via
system e.g. BEETLE
Power Jack Current supply for the screen via external power pack (12V)
DVI-I DVI or VGA data transfer from TFT display to the system
RJ10/RMT RMT, "Remote", serves the on/off activation of the BEETLE
system. Corresponds to the function of the On button at
the BEETLE system.
If the power is not supplied by a BEETLE system you have to use an
external power supply unit.
Only UL Listed LPS (Limited Power Source) power supplies can be
used.
By connecting the system's cable the screen will be switched on.
Connecting BA83
Remove the bezel of the monitor and the cable cover of the base. Before
connecting cables switch off the system and disconnect it from the mains
supply.