User manual

BA83 User Manual

Table Mounting

Underneath the cable cover there are two holes in the BA83 stand (see

arrows) with a diameter of 5.5 mm. The holes can be used to fix the stand

on the footprint with appropriated screws. We recommend using screws

with a diameter of 4.0 to 5.0 mm.

Note that the screw type is suitable for the footprint material.

Useful applications may be:

Determine a certain position e.g. above a cable aperture in the table.

Secure the display stand against “theft by passing”.

Protect the install position on a tilted footprint

Cable aperture