User guide

Moun ting on the left Side
Proceed as described above ("Mounting on the right side", page 44ff).
Fasten the retain plate of the waiter lock on the opening of the housing
rotated 180°.
Use the right borehole of the two pairs of boreholes to install the retain
plate.
Put the cable of the waiter lock into the housing. Slip the waiter lock on the
retain plate and push it backwards. Make sure that the cable is not crimped.
Screw the waiter lock to the retain plate.
Put the housing of the waiter lock on the retain plate and push it until it is
engaged.
Control the cabling. Flap the loudspeaker's bezel upwards and snap it into
place. Mount the monitor's stand.
WAITER LOCK
50