User guide

Push the reader beneath

the bracket, so that the

screws fit into the keyhole

and the holder lays under

the clamps.

Tighten the screws.

Pass the cable through

the cable guidance and

connect it to the USB

interface. If a HUB is

available you should use

one of it's USB interfaces.

Do not release the cable

loop.

Attach the cover of the

swipe card reader and

push it to the monitor until

it engages (see page 39).

Flap the loudspeaker's bezel upwards and snap it into place.

Mount the monitor's stand.

MAGNETIC SWIPE CARD READER

Clamp