User guide

Attach the cover of the Swipe Card Reader (1) and push it to the monitor
until it engages (2).
Flap the loudspeaker's bezel upwards and snap it into place.
Mount the monitor's stand.
Moun ting On the Left Side
Proceed as described above ("Mounting on the right side"). Disconnect the
cable to connect it to the USB interface at the rearside of the monitor.
Push the bracket of the Reader into the opening of the housing, so that the
holes are lying upon each other. Then tighten it.
Pass the cable into the
cable guidance of the
Swipe Card Reader and
connect it.
39
MAGNETIC SWIPE CARD READER

