User guide

Table Mounting
Underneath the cable cover there are two holes in the BA83 stand (see
arrows) with a diameter of 5.5 mm. The holes can be used to fix the stand
on the footprint with appropriated screws. We recommend using screws with
a diameter of 4.0 to 5.0 mm.
Note that the screw type is suitable for the footprint material.
Useful applications may be:
n De ter mi ne a cer tain po si ti on e.g. abo ve a ca ble aper tu re in the tab le.
n Se cu re the dis play stand against “theft by pas sing”.
n Pro tect the in stall po si ti on on a til ted foot print.
19
MOUNTING THE TUBE ADAPTER
Ca ble aperture
Ca ble aper tu re