User guide

Se cu ri ty
The operator panel module can be mounted horizontally turned thus to
handicap the access.
Slightly press the module
inwards at the left and
right hand side (1).
Remove the module of
the recesses and carefully
move it off downwards
(2).
Carefully turn the device
through 180
0
(3).
Reinsert the module into
the recesses (4). Mind not
to jam the cables.
Pro tec ti on
If you do not need the USB interface in the operator panel and you want to
close the port you can order a small cover in the required colour at Wincor
Nixdorf. To attach this bezel remove the operator panel as described above
and insert the bezel between USB interface and the panel.
5
SE CU RI TY



