User manual

2 BEETLE /X plus User Manual
Safety Notes
The device may only be repaired by authorized qualified person-
nel. Unauthorized opening of the device and inexpertly carried-out
repairs may not only seriously jeopardize the safety of the user,
but also cancel all warranty and liability agreements.
Expansion cards with electrostatically sensitive devices (ESD) can
be marked with this sticker.
Important Notes
The modular POS system BEETLE /X plus conforms to the current safety
standards for data processing equipment.
 If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be
absolutely dry before being put into service; an acclimatization period
of at least two hours must therefore be observed.
 This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
 When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily accessible.
 To disconnect the device from the supply voltage completely, switch
off the device and disconnect the power plug of the system.
 Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
 The ventilation slots of the power supply must remain unobstructed to
ensure sufficient ventilation of the equipment. If the equipment is to
be fitted, you must ensure that the specified minimum distances are
maintained and constant ventilation is provided.
 Never plug in or unplug data communication lines during thunder-
storms.
 Protect devices from vibrations, dust, moisture and heat.
 Always dispose of used parts, such as batteries, in an environmentally
safe manner.