User manual

32 BEETLE /X plus User Manual
PLINK- Adapter (optional)
Would you like to use your functional equipment, so it is possible to con-
nect the screen to PLINK TFT interface via a DP connector.
For connecting a display with touch function is COM5* the default position
on the motherboard. If a PCI COM board is installed, COM7* or COM8* is
the position on the board.
NOTE
Expansion cards with electrostatically sensitive devices (ESD) may
be marked with this sticker.
When you handle boards fitted with ESDs (electronical components), you
must observe the following aspects under all circumstances:
 You must always discharge yourself (e. g. by touching a grounded
object) before working with boards containing ESDs.
 The equipment and tools you use must be free of static charges.
 Pull out the power plug before inserting or pulling out boards contain-
ing ESDs.
 Always hold boards with ESDs by their edges.
 Never touch pins or conductors on boards fitted with ESDs.