User manual

BEETLE /X plus User Manual 19
DVI-I
Via DVI interface a high-resolution LCD monitor can be connected to the
BEETLE system.
The DVI jack has a transmission of video signals with a max. resolution of
1920 × 1200 pixels/60 Hz. DVI-I transfers digital and analogue image data.
Mini- DIN (KYBD)
The BEETLE /X plus has a 6-pin mini-DIN jack for connecting a keyboard.
Make sure that the connector is plugged firmly into the socket to prevent
mal functioning.
Power is supplied to the key board via this socket. If you wish to connect
an older standard PC keyboard with DIN connector, you must use a special
adapter cable, obtainable from the WN branch office responsible for your
area.
You can connect a mouse in parallel via a Y-cable.
USB (Universal Serial Bus)- A
You can connect several USB peripheral devices e.g. scanner or scales to
the USB.
Only connect devices and cables that comply with the valid USB
specification.
RJ45 (LAN)
The system can be connected to a network (LAN) from the back panel.
LEDs
left LED
lights green
Network connection
flashes green
Date transfer
right LED
off 10 MBit
lights green 100 MBit
lights orange 1000 MBit