User manual

16 BEETLE /X plus User Manual
The power cord receptacle and the power socket for the printer
are located on the back of the BEETLE system.
The power pack must be removed or replaced by authorized quali-
fied personnel only. Only replace power packs released by Wincor
Nixdorf. To disconnect the device from the supply voltage com-
pletely, switch off the device and disconnect the power plug.
Power Connector
This connector provides the power. Connect the according end of the
power cable to this port of the external power supply and the other end to
the mains socket.
Pull the mains plug to power-off the device.