User manual

10 BEETLE /X plus User Manual
Basic Settings
Ex works, the BEETLE /X plus is configured to your order. Your configura-
tion must be subsequently adapted to support supplementary
devices such as scanners. For more information, contact the Wincor Nix-
dorf International GmbH branch office responsible for your area.
Cabling of the BEETLE /X plus
All devices belonging to the modular BEETLE /X plus that have a separate
power cable must be connected to the same electric circuit.
 Make sure that all data cables at the system unit and the peripherals
are correctly plugged.
 Plug one end of the DC cable into the socket of the BEETLE /X plus and
the other end to the socket of the external power supply.
 Plug the connector of the power cable to the power supply and the
other end to the wall socket. Shortly press the Power button at the
front side to start the system.
Never connect data cables when the system is switched on.