User manual

BEETLE /X plus User Manual 9
Vertical Installation Of the Equipment

3 Keyholes (Wall mounting)

Type Label

4 Rubber Feet
If the BEETLE /X plus is to be installed with a HDD in vertical
position the right hand side of the system must be on top. For
specification see page 37.
The BEETLE /X plus is designed for horizontal and vertical installation.
 Mind the following minimum clearances also for vertical mounting to
ensure sufficient ventilation (see also page 8):
forward: 50 mm,
backward: 60 mm
sideways (right): 50 mm
sideways (left): 20 mm
 A surface made of nonflammable material (e.g. concrete or metal)
must be located underneath the vertically mounted power supply unit.




