BEETLE /X plus Modular POS System User Manual
We would like to know your opinion on this publication. Please send us a copy of this page if you have any constructive criticism. We would like to thank you in advance for your comments. With kind regards, Your opinion: Wincor Nixdorf International GmbH Technical Documentation RD HWD01 Wohlrabedamm 31 D-13629 Berlin E-Mail: retail.documentation@wincor-nixdorf.com Order No.
BEETLE /X plus Modulare POS System User Manual Edition September 2012
All brand and product names mentioned in this document are trademarks of their respective owners. Copyright © Wincor Nixdorf International GmbH, 2012 The reproduction, transmission or use of this document or its contents is not permitted without express authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability; technical modifications possible.
Contents Manufacturer’s Certification .....................................................................1 Tested Safety ................................................................................................ 1 FCC-Class A Declaration ................................................................................ 1 Safety Notes .................................................................................................. 2 Important Notes .....................................................
USB (Universal Serial Bus)- A .................................................................. 19 RJ45 (LAN) ............................................................................................... 19 Jack Plug 3.5 mm (IN/OUT/MIC) ............................................................. 20 RJ12 (CASHDR) ........................................................................................ 20 Disconnecting Cables..............................................................................
Manufacturer’s Certification The device complies with the requirements of the EEC directive 2004/108/EC with regard to ‘Electromagnetic compatibility" and 2006/95/EG “Low Voltage Directive”. Therefore, you will find the CE mark on the device or packaging. Tested Safety The POS system BEETLE /X plus has been provided with the symbol for “Tested Safety”. In addition, the BEETLE /X plus has received the UL symbol and cUL symbol.
Safety Notes The device may only be repaired by authorized qualified personnel. Unauthorized opening of the device and inexpertly carried-out repairs may not only seriously jeopardize the safety of the user, but also cancel all warranty and liability agreements. Expansion cards with electrostatically sensitive devices (ESD) can be marked with this sticker. Important Notes The modular POS system BEETLE /X plus conforms to the current safety standards for data processing equipment.
In emergencies (e.g. damaged housing or damaged power cable, penetration by liquids or foreign bodies), the device must be switched off immediately, the power plug disconnected and the Customer Service of Wincor Nixdorf or your dealer must be notified. The lithium battery must be disposed of in accordance with local regulations for special waste. In case of an improper change of the lithium battery it exist an explosion risk. Your BEETLE system is the result of modern technical innovation.
Introduction BEETLE /X plus is the powerful and economical basis for your POS system. Powerful processors ensure a quick processing of all operations. You can connect a variety of different peripheral devices to your BEETLE /X plus and even the choice of the software is not limited to a certain product. This provides you with a considerable degree of flexibility when arranging the configuration of your POS system. The BEETLE can also be connected to a network.
Care Of BEETLE /X plus Clean your BEETLE /X plus at regular intervals with a suitable plasticsurface cleaner which can be ordered from Wincor Nixdorf International GmbH. Make sure that the power plug is disconnected and that no liquid finds its way into the device. Recycling the BEETLE /X plus Environmental protection does not begin when the time has come to dispose of the BEETLE; it begins with the manufacturer.
Email: info@wincor-nixdorf.com or on the internet. We look for ward to your mail. Warranty Wincor Nixdorf guarantees generally a warranty engagement for 12 months beginning with the date of delivery. This warranty engagement covers all damages which occur despite a normal use of the product. Damages because of improper or insufficient maintenance, improper use of the product or unauthorized modifications of the product, inadequate location or surroundings will not be covered by the warranty.
Before Switching On the System Unpacking And Checking the System Unpack the components and verify that the scope of delivery is identical to the information on the delivery ticket. The carton contains the basic unit and a country-specific accessories kit. Some ordered composition may be installed.
Horizontal Installation Mind the minimum distances indicated below! If the equipment is to be fitted, you also must ensure that the specified minimum distances are maintained and constant ventilation is provided. The immediate ambient temperature of the system must not exceed 40 °C (104 °F). 70 mm 60 mm 20 mm 50 mm 50 mm Mind the following minimum distances for the power supply: 60 mm 60 mm 60 mm approx.
Vertical Installation Of the Equipment 3 Keyholes (Wall mounting) Type Label 4 Rubber Feet If the BEETLE /X plus is to be installed with a HDD in vertical position the right hand side of the system must be on top. For specification see page 37. The BEETLE /X plus is designed for horizontal and vertical installation.
Basic Settings Ex works, the BEETLE /X plus is configured to your order. Your configuration must be subsequently adapted to support supplementary devices such as scanners. For more information, contact the Wincor Nixdorf International GmbH branch office responsible for your area. Cabling of the BEETLE /X plus All devices belonging to the modular BEETLE /X plus that have a separate power cable must be connected to the same electric circuit.
Power Button at the Front Side (Standard) Power In at the Back Side of the System Power Button at the Back Side (optional) Power In external Power Supply Power Out to the POS System The power supply can be connected to all conventional power supply networks. It automatically adjusts itself to the particular voltage. For the specified ratings see page 35, »Technical Data«.
POS System BEETLE /X plus Front Side View 2 USB Interfaces Power Button HDD/SSD Power- LED Ventilation Slots (do not cover) USB (Universal Serial Bus)- A, USB 2.0 You can connect several USB peripheral devices to the USB or powered USB interface (12V or 24V). Only connect devices and cables that comply with the valid USB specification.
Power Button When the external power supply is connected to the main power and the DC cable is plugged at the POS system, you can switch on the system with this button.
Interior View 14 RAM stripe Cooling element for the processor Carrier for Riser Card (for example PCI) Carrier for 2.
Connector Panels Power Supply The external power supply can be connected to all conventional power supply networks. It automatically adjusts itself to the particular voltage. The power supply unit (PSU) carries the 80plus Gold certificate. A Gold certification stands for more than 80% energy efficiency.
The power cord receptacle and the power socket for the printer are located on the back of the BEETLE system. The power pack must be removed or replaced by authorized qualified personnel only. Only replace power packs released by Wincor Nixdorf. To disconnect the device from the supply voltage completely, switch off the device and disconnect the power plug. Power Connector This connector provides the power.
System Unit Always make sure that the system is switched off when you do cabling works. Connecting peripherals with the system switched on is not allowed. BEETLE /X plus with a J1- Motherboard Example for a connector panel: RJ10 socket, RMT 4 x D-Sub (COM1 interface and COM2*- COM4*Interfaces (power supplied) DP (DisplayPort) DVI-I Mini DIN (KYBD) 4 x USB- A (USB 2.
RJ10/RMT Jack (optional) You connect the remote (RMT) interface of your POS system via a cable to the RMT interface of the display (BA8X). You use the RMT function by pushing the Power button of the display. The Remote On/Off function (RMT) enables you to wake up a BEETLE system out of either standby/ hibernation or soft-off mode. It also puts a running system into standby / hibernation mode. The activated mode is depending on the settings of the operating system.
DVI-I Via DVI interface a high-resolution LCD monitor can be connected to the BEETLE system. The DVI jack has a transmission of video signals with a max. resolution of 1920 × 1200 pixels/60 Hz. DVI-I transfers digital and analogue image data. Mini- DIN (KYBD) The BEETLE /X plus has a 6-pin mini-DIN jack for connecting a keyboard. Make sure that the connector is plugged firmly into the socket to prevent mal functioning. Power is supplied to the key board via this socket.
Only connect shielded LAN cables (CAT5 or CATe for 1000 MBit) as these offer a better protection in case of interferences in a network. Jack Plug 3.5 mm (IN/OUT/MIC) Physically the microphone (MIC) and the IN/OUT jacks are identical as all require 3.5 mm phone jack for data transfer. However, they differ concerning the pin assignment so that a faultless transmission is only ensured with the designated connection. Besides a microphone a headset can be used alternatively via this interface.
Disconnecting Cables Never unplug a cable by pulling on the cable; always take direct hold of the plug itself. Follow the procedure below when disconnecting cables: Turn off all power and equipment switches. Unplug all power plugs from the grounded-contact power sockets. Unplug all data communication cables from the sockets of the data networks. Unplug all cables from the devices. With MINI-DIN plugs (Wincor Nixdorf), the plug remains inserted until released.
The powered USB connector is disengaged by pressing the spring that is marked by an arrow. Manually loosen the knurled screws of the connector. The DisplayPort connector is disengaged by pressing the spring that is marked by an arrow. Manually loosen the knurled screws of the DC connector at the power supply. RJ45 plugs lock in when you insert them. To release them push the latch (see arrow).
Storage Media Following storage media are available one 2.5" SATA hard disk or one 2.5" solid state drives. A solid state disk drive is a data storage drive that uses memory elements in place of a rotating disk to store data. The SSD easily subsitutes the hard disk and emulates a hard disk drive interface. The most SSDs are flash memory based. Change Of the Hard Disk Drive First ensure that the device is switched off and that the power connector is disconnected. Open your BEETLE /X plus.
Lift the top cover at the back side (1) and pull it out of the front guide (2). Loosen the power cable (3) and the data cable (4).
Push the unlocking plate with a screw driver downward. Move the hard disk with the holder out of the carrier.
Handle the hard disk with care when installing it and never touch bare electronics. Put the green holder aside and change the hard disk. Ensure that the settings of the new hard disk are correct. It may also be necessary to change settings in the BIOS (see the manual for the motherboard). Please pay regard to the correct fitting position. Make sure that the metal bolts are corresponding to the stampings in the base plate (see side view).
Side view: Lift hard disk and green holders. Press those together and move the hard disk with the holders into the carrier until it locks into place. Plug the connectors and close the system with the cover.
RAM Module Shut down the system. Unplug the power cord at the rear side of the device. Remove the housing cover.
Insert the new RAM module into the socket. Push the module down until the locking audible clicks in. RAM Module Click Click A coding on the module (notch) avoids a wrong insertion. Close the housing cover and plug the power cord at the rear side of the device.
USB- Hub (optional) There are three 12V and one 24V USB interfaces or six 12V and one 24V USB interfaces on optional available boards. They allow the connection of peripherals such as printers and scanners. Devices like hard drives can also be connected via a USB interface. A mechanical code avoids the plugging of a USB 12V connector into a USB 24V jack. Always use this onboard P-USB 12V (*) to connect a BA82 or BA83 screen with additional options or any other multifunctional screens.
COM5*-COM8* Interfaces (optional) The standard system is configured with three COM* interfaces. An expansion of COM5*/COM6* interfaces is possible via a motherboard connector, version 1. Another option is the installation of a PCI-COM board, version 2. The COM5* up to COM8* interfaces are available via this board. Version 1 with COM5*/COM6* Version 2 with COM5*/COM6*/COM7*/COM8* Scanners, customer and operator displays without power supply of their own are connected to these serial interfaces.
PLINK- Adapter (optional) Would you like to use your functional equipment, so it is possible to connect the screen to PLINK TFT interface via a DP connector. For connecting a display with touch function is COM5* the default position on the motherboard. If a PCI COM board is installed, COM7* or COM8* is the position on the board. NOTE Expansion cards with electrostatically sensitive devices (ESD) may be marked with this sticker.
Starting Up the System After installing the BEETLE /X plus, switch on the system by using the Power button on the front panel and the power switch on the power supply. The system first performs an automatic self-test to test its basic functions. For example, you may see the following message (irrespective of processor type) on the monitor: WN „ID xx/xx Date“ xx/xx is the placeholder of the BIOS version number.
If the operating system has started up without error, the application software is automatically booted if necessary. A message is displayed as soon as the BEETLE /X plus is ready for operation. For more detailed information, see the description of your application program.
Appendix Technical Data Dimensions Width 288 mm Depth ca. 265 mm Height ca. 78 mm Weight ca. 3,2 kg Climatic category Class 3K3 DIN IEC 721-3-3 Class 2K2 DIN IEC 721-3-2 Class 1K2 DIN IEC 721-3-1 Temperature Operating (3K3) + 5°C up to + 40°C Transport (2K2) - 25°C up to + 60°C Storage (1K2) + 5°C up to + 40°C Input Voltage 100- 120 V, 200- 240 V Max.
Interfaces (J1) Line In/Out, Mic COM1 (w/o power supply), COM2*- COM4* (with power supply), Optional COM5*/COM6* (with power supply) via motherboard or COM5*- COM8* (with power supply) via PCI- COMboard 4 Standard USB + 2 Standard USB at the front side Optional 3x 12V, 1x 24V via PoweredUSB hub or 6x 12V, 1x 24V via PoweredUSB hub 1x DVI-I interface with resolution up to 1920 × 1200 pixel 1x DisplayPort with resolution up to 2560 x 1600 pixel Optional 1x PLINK, resolution up to 1600x 1200 pixel (24 Bit co
Wall Mounting System Dimensions in mm 27,7 5 5,7 5,7 5,7 Ø 10 5,7 210,2 16,1 29,4 BEETLE /X plus User Manual 215 288 37
Wall Mounting Power Supply 4,5 Ø 8,5 116 160 140,5 Dimensions in mm 10 10 232 A horizontal mounting of the external power supply is recommended (see above).
Total Current Consumption Of Interfaces The total current consumption at 5V interfaces must not exceed 5A. Each COM* Each USB Each USB (HUB) TFT/LCD-Display Max. 5A @ 5V = 300mA, in total 500mA = 500mA, in total 2A = 500mA, in total 2A The total current consumption at 12V interfaces must not exceed 5A. Each COM* Each USB Each USB (HUB) TFT/LCD-Display Max. 5A @ 12V = 600 mA, in total 900mA = 1.5A, in total 2A = 1.
Abbreviations CE CFC CHC COM CPU cUL DIN DP D-Sub DVI-I ESD HDD IEC ISO LAN LED PCI PCIe PEN PLINK POS PS RAM SSD TFT TN-S UL USB VGA WAN WLAN WN 40 European Symbol of Conformity Chlorofluorocarbon Chlorinated hydrocarbon RS 232 Interface Central Processor Unit (for example INTEL Celeron-M) Canadian Registration (Recognized by UL) Deutsches Institut für Normen (German Institute for Standards) DisplayPort D- Shaped Sub miniature Digital Visual Interface integrated Electronically Sensitive Devices Hard Disk
Wincor Nixdorf International GmbH D-33094 Paderborn Order No.
