User manual

BA82 User Manual
61
Screw the fingerprint reader to the retain plate.
Put the housing of the waiter lock on the retain plate and push it until it is
engaged.
Control the cabling. Flap the loudspeaker's bezel upwards and snap it into
place. Mount the monitor's stand.
Mounting On the Left Side
Proceed as described above ("Mounting on the right side", page 56ff).
Fasten the retain plate of the waiter lock on the opening of the housing
rotated 180°.
Put the cable of the fingerprint reader into the housing. Slip the fingerprint
reader on the retain plate and push it backwards. Make sure that the cable
is not crimped.
Screw the fingerprint reader to the retain plate.