Technical data

3
 In case of emergencies (e.g. damaged housing, liquid or foreign objects
getting into the device), the device should be switched off immediately,
the mains plug of the BEETLE or the BA80 should be removed, and the
Wincor Nixdorf customer service should be contacted.
 If the LCD display element is broken and the liquid crystal solution leaks
out of the display and onto your hands, clothing etc, wash your hands or
clothing immediately with soap or alcohol, holding them under running
water for at least 15 minutes. If the liquid comes into contact with your
eyes, please consult a doctor immediately.
 Generally you should connect IT-devices only to power supply systems
with separately guided protective earth conductor (PE), known as TN-S
networks. Do not use PEN conductors! Please also observe the rec-
ommendations of the norm DIN VDE 0100, part 540, Appendix C2, as
well as EN50174-2, §5.4.3.
Cleaning the BA80
Always turn off the system before cleaning.
The glass surface of your Touch Screen should be cleaned with a mild,
abrasive-free, commercially available glass cleaning product. All pH-neutral
materials (pH 6 to 8) are good for cleaning. Cleaners with pH values 9 to 10
are not recommended. Cleaning with water and isopropyl alcohol is possible
as well. Do not use solvents containing acetic acid. Use a soft, fine-meshed
cloth to clean the surface. Dampen the cloth slightly and then clean the
screen. A wrong maintenance may cause damages to the screen, which are
not covered by guarantee or warranty.
Warranty
Generally, Wincor Nixdorf guarantees a limited warranty engagement
for twelve months beginning with the date of delivery. This warranty
engagement covers all those damages that occur despite a normal use
of the product. Damages because of
 improper or insufficient maintenance,
 improper use of the product or unauthorized modifications of the
product,
 inadequate location or surroundings