User manual

BA71R-3 Operating Manual 16
Adjustment
Adjusting The Monitor
The LCD monitor is designed to work with a range of compatible
adapters on the market. Due to the possible deviations between
these adapters, you may need to make some adjustments to fit the
monitor to the adapter used.
Adjustment procedure
 Firstly, you must activate the OSD mode through pressing the
MENU key, the symbols will be shown in the center of screen
(see next page).
Note: In the last paragraph, we will assume that you had already
done this procedure and you only need an explanation on how to
change the settings.
 Use the key to select the required adjustment item up
or down.
 Use Enter / Mode ( ) key to select the item.
 Use the key to change the control value for optimum
viewing.
 After finishing all the settings, please press the Menu key, to get
back to Main Menu. If you press the Menu key again, the setting
will be stored in the monitor’s memory. If you want to discard
the settings, just move to "RESET" and press the Enter key. This
will restore the pre-defined values)
 In the Non OSD mode, pressing this key can do the
auto-adjustment function.
&
&