User manual

BA71R-3 Operating Manual 12
 Install the VESA stand:
The rear cover is suitable for other stand or arm if they meet
VESA standard of 75 x 75 mm VESA holes.
The max. screw length is 8 mm.
The min. screw length is 6 mm.
 Install the T-Joint to platforms:
- Insert the T-joint into the footed stand or the tubular stand of
the POS system (1).
- Fasten the screw into place (2).
- Use hands to loosen the adjusting nut and adjust the display to
a suitable view angle. Then fasten the adjusting nut (3).
The angle of the screen can be adjusted from a horizontal
position to a vertical position without any tools.