User guide

Important notes
The display BA69W conforms to the current safety standards for data
processing equipment.
r
If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be abso
-
lutely dry before being put into service; an acclimatization period
of at least two hours must therefore be observed.
r
This device is equipped with a safety-tested power cable and may
be connected only to a prescribed grounded-contact power so
-
cket.
r
When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily accessi
-
ble.
r
To disconnect the device from the supply voltage completely,
switch off the POS System and disconnect the power plug.
r Ensure that no foreign objects (e.g. office clips) find their way into
the device, as this may lead to electric shocks or short-circuits.
r In order to ensure that the device is well ventilated and to prevent
overheating, do not obstruct the ventilation slots on your device.
r
Never plug in or unplug data communication lines during thunders
-
torms.
r
Protect devices from vibrations, dust, moisture and heat.
r
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be swit
-
ched off immediately, the power plug disconnected and the Custo
-
mer Service of Wincor Nixdorf International GmbH or your dealer
must be notified.
GB - 2