User guide

VGA/4 controller MUX
The controller is configured as a PCI card with a VGA-compatible control
-
ler IC, the VGA-BIOS, the display memory, and the LCD interface. The
LCD signals for the customer and operator displays are transmitted via
two 26-pin plug connectors on the front mask.
VGA/4 embedded scale controller
The controller can be integrated to a system as an optional component.
A RS 232 interface is used for the data transfer of the controller.
The controller is equipped with a 16 bit microprocessor, a graphic IC with
LCD interface, a firmware PROM, a static RAM and a UART.
The LCD signals for the BA69W will be transferred via a 26-pin connector.
GB - 36