Technical data

BEETLE /iScale Hub

_____________________________________________________________________

Cable Connections for the BEETLE /M and

BEETLE /iScale Hub

Connect the BEETLE /iScale Hub Scale COM to the COM4 interface on

the rear side of the BEETLE /M.

Since the BEETLE /iScale Hub does not have its own ON/OFF switch,

we recommend connecting the BEETLE /iScale Hub using the switched

auxiliary power socket to the sub-socket of the BEETLE /M (see

illustrations on pages 8 and 9).

You can then control both devices using the ON/OFF switch on the rear

side of the BEETLE /M.

The connections between the BEETLE /M and the BEETLE /iScale Hub,

as well as between the BEETLE /iScale Hub and the BA69W display,

are each established using an LCD cable. The scale’s weight data are

transferred between the BEETLE /iScale Hub and the BEETLE /M via a

COM cable.