Technical data

BEETLE /iScale Hub

_____________________________________________________________________

____________________________________________________________________________

Installing the Devices

Install the devices so that they are not subjected to any extreme

environmental conditions. Protect the devices from shocks, dust,

moisture, heat and strong magnetic fields. Always be sure that the side

ventilation slots of the BEETLE /M are not blocked, thus ensuring that

the device always has sufficient ventilation. If you plan to install the unit

into a confined space, always be sure to maintain the minimum side

clearance (50 mm) and ensure constant air flow for effective ventilation.

The immediate ambient temperature for the systems must not exceed

40° C. These requirements can best be met if you do not install the unit

into completely confined furniture.

When installing the devices, also make sure that the calibration seal

and calibration switch on the rear side of the BEETLE /iScale Hub are

visible and readily accessible! If it is accessible from only one side,

turn the devices (for example 180 degrees vertically) so that the rear

sides point outwards (to the access side).

Place the BEETLE /M on the BEETLE /iScale Hub.

50 mm

Sub-socket

ON/OFF