User guide

Quick Heal Total Security 2011
Using PC2Mobile Scan
Quick Heal Technologies (P) Ltd. 86 User Guide
Important Requirements for PC2Mobile Scan
• This feature is only supported on Microsoft Windows XP, Windows Vista and Windows 7 operating systems.
• For Windows Mobile based devices you should have Microsoft Active Sync 4.0 or above installed on PC.
• For Apple iPhone,
iTunes software from Apple is compulsory to be installed on PC.
• For Nokia Phones,
Nokia PC Suite software is recommended to be installed on the PC. For all other mobile phones it is
recommended to have respective vendor software drivers installed on the PC.
• For Bluetooth connection PC should have Bluetooth device with appropriate drivers properly installed.
• For Bluetooth device only Microsoft, Broadcom and Widcomm drivers are supported. For better results we recommended
to install Microsoft drivers for Bluetooth device.
• For Bluetooth connection between mobile device and PC some of the phone models need to have Quick Heal Connector
installed on the mobile device. Quick Heal Mobile connection wizard will help you install Quick Heal Connector in your
mobile device. Mobile phones that needs to have Quick Heal connector installed for scanning are: Nokia 3650, Nokia
3660, Nokia 7650, Nokia N-Gage, Nokia N-Gage QD, Panasonic X700, Siemens SX1, Nokia 3230, Nokia 6260, Nokia 6600,
Nokia 6630, Nokia 6670, Nokia 6680, Nokia 6681, Nokia 7610, Nokia N70, Nokia N90, Nokia E50, Nokia E61, Nokia E65,
Nokia N73, Nokia N80, Nokia N95, Nokia 9300, Nokia 9500, Nokia 7710, Motorola A1000, Sony Ericsson P800, Sony
Ericsson P900 and Sony Ericsson P910i.
Configuring Windows Mobile Phone before Scan
To configure your Windows Mobile Phone, please follow the below given steps:
1. Connect your Window SmartPhone to PC or Laptop through USB Cable.
2. Ensure that Microsoft Active Sync 4.0 or above is installed and running.
3. Start Quick Heal Total Security.
4. In the Quick Heal Total Security main window, click Scan on the left pane.
5. In the Scan pane, select Mobile tab.
6. Click Add Mobile.
7. Select Windows Mobile Phone and click Next.
8. Total Security Mobile Connection Wizard will search for Windows Mobile attached to your computer.
9. Upon successful detection of Windows Mobile, click Finish to complete the mobile configuration.
Once Windows Mobile is successfully configured, it will be added in the Mobile List.
Scanning Windows Mobile
To scan a Windows Mobile, follow the below given steps:
1. Start Quick Heal Total Security.
2. In the Quick Heal Total Security main window, click Scan on the left pane.
3. In the Scan pane, select Mobile tab.
4. Select the Mobile Phone from the list.
5. Click Scan to start scanning.
Scanning Notification for Windows Mobile Phone when connected to PC
When you connect your Windows Mobile Phone to PC using USB cable, Quick Heal Total Security PC2Mobile automatically detects
and prompt you for Scan.