User guide

Quick Heal Total Security 2011

Quick Heal Menus

Quick Heal Technologies (P) Ltd.

User Guide

Report Settings

Report Settings lets you specify the number of days to retain the reports generated by Quick Heal Total Security. You can also

retain all the reports without deleting any of the reports generated. By default, the setting has been configured to retain reports for

30 days.

Configuring Report Settings

To configure report settings, please perform the following steps:

1. Click Settings on the

Dashboard

2. The Settings screen is displayed. Click Report Settings.

3. The Report Settings screen is displayed. By default, the Delete reports after checkbox is checked and the value is set

to 30 days. If you want to retain all the reports generated then uncheck the Delete reports after checkbox. If you

want to change the value of number of days for retaining the reports, then click the drop-down menu and select from the

choices.

4. Click Save Changes to apply the settings.

Report Virus Statistics

Report Virus Statistics feature in Quick Heal Total Security submits the virus detection statistics report, generated during scans, to

Quick Heal Research Center.

Report Virus Statistics feature in Quick Heal Total Security can be accessed by clicking Settings from the

Dashboard

. Click the

button to either enable or disable Report Virus Statistics feature. By default, Report Virus Statistics feature is enabled and set to

ON.

Restore Default Settings

Restore Default Settings changes all the modifications to settings and restores the default settings. If you have customized the

settings of Quick Heal Total Security and feel that the protection of the system may have been compromised, then you can bring

back the protection to its default settings with the click of a single button. This single click restores all default settings so that you

don’t have to remember all the configurations made. To restore default settings, please perform the following steps:

1. Click Settings on the Dashboard.

2. In the Restore Default Settings row click Default All.