User guide

Quick Heal Total Security 2011 Quick Access Features
Quick Heal Technologies (P) Ltd. 46 User Guide
Performing Memory Scan
To perform a memory scan, please perform the following steps:
1. Click Scan -> Memory Scan on the Quick Heal Dashboard.
2. The scan will begin. Upon completion of the scan, the scan statistics and report will be provided.
3. After reviewing the statistics and report click Close.
Performing Boot Time Scan
Boot Time Scan is very useful to disinfect the system. In case the system is badly infected by a virus and it cannot be cleaned
because the virus is active, use Boot Time Scan. This scan will be performed on next boot using Windows NT Boot Shell. To activate
Boot Time Scan, please perform the following steps:
1. Click Scan -> Boot Time Scan on the Quick Heal Dashboard.
2. A confirmation prompt will be displayed to set boot time scanner on next boot. Click Yes.
3. To scan the system immediately, click Yes to restart the system. To scan the system later at next boot click No.
Performing Mobile Scan
1. Click Scan -> Mobile Scan on the Quick Heal Dashboard.
2. Select the Mobile Phone from the list.
3. Click Scan to start scanning. Upon completion of the scan, the scan statistics and report will be provided.
4. After reviewing the statistics and report click Close.