User guide

Quick Heal Total Security 2011
Quick Heal Protection Center
Quick Heal Technologies (P) Ltd. 43 User Guide
Data Theft Protection
Data Theft Protection is used to block to-and-fro transfer of data between the system and USB drives. This feature ensures
protection of confidential information on your system by blocking transfer of data from the system to these drives. It also blocks
transfer of data from the USB drives to the system protecting your system from malware that can infect your system.
Data Theft Protection feature in Quick Heal Total Security can be accessed by clicking External Drives and Devices from the
Dashboard . Click the button to either enable or disable Data Theft Protection feature. By default, Data Theft Protection feature is
enabled and set to ON.
You can customize the protection provided by the feature by clicking Data Theft Protection. The following two options will be
available:
Read only and no
write access to
external drives
Selecting this option allows transfer of data from the USB drives to the system
but not from the system to the USB drives. By default this option is selected.
Block complete
access to external
drives
Selecting this option blocks to-and-fro transfer of data between the system
and the USB drive.
After making the selection click Save Changes to apply the settings.
Scan Windows Mobile
PC2Mobile Scan feature can be customized to notify whenever a Windows Mobile phone is connected for scanning purposes. If
enabled it notifies whenever a Windows Mobile phone is connected to a PC using a USB cable.
Scan Windows Mobile feature in Quick Heal Total Security can be customized by clicking External Drives and Devices from the
Dashboard . Click the button to either enable or disable Scan Windows Mobile feature. By default, Scan Windows Mobile feature is
enabled and set to ON.