User guide

Quick Heal Total Security 2011
Installing Quick Heal Total Security
Quick Heal Technologies (P) Ltd. 16 User Guide
How to install Quick Heal Total Security
To begin installation, insert the Quick Heal Total Security CD in the CD or DVD drive. The autorun feature of the CD is enabled and
it will automatically open a screen and provide a list of options. Sometimes the CD or DVD Drive does not automatically start a CD
when it is inserted. In such case, to start the installation, please perform the following steps:
1. Double click the My Computer or Computer icon on the Desktop.
2. Right click CD-ROM drive and select Explore option.
3. Double click Autorun.exe to start the installation.
Please perform the following steps for a successful installation of Quick Heal Total Security:
1. Click Install Quick Heal Total Security to initiate the installation process.
2. The installation wizard will perform a pre-install virus scan of the system. This pre-install scan will scan the system
memory for viruses. During the pre-install scan, if a virus is found active in memory, then:
a. The installer automatically sets the boot time scanner to scan and disinfect the system on next boot.
b. After disinfection of the system, the system will start and you need to re-initiate the installation. For more
details refer to Boot Time Scan in User Guide.
During the pre-install virus scan if viruses are not found in the in the system memory, then the installation will proceed
further.
3. The End User License Agreement screen appears. Read the license agreement carefully. At the end of the license
agreement there are two checkboxes: Submit suspicious files and Submit statistics. By default these two options
are checked. If you do not wish to submit suspicious files or statistics or both, then uncheck these options. If you do not
agree with the terms mentioned in the license agreement, click Cancel to discontinue the installation. If you agree with
the terms mentioned, then check I Agree and click Next to continue the installation.
4. The Install Location screen appears. The default location where Quick Heal Total Security will be installed is displayed.
The disk space required during installation is mentioned on the screen. If the default location has insufficient space, or to
install Quick Heal Total Security on another location, click Browse to change the installation location otherwise click
Next to continue the installation.
5. The installation progress screen appears. This screen displays the status of installation in the progress bar.
6. Upon completion, a screen appears that indicates Quick Heal Total Security was successfully installed on the system. Click
Register Now to initiate the activation process or click Register Later to perform activation at some other time.