Specifications

ManualsBrandsWincomm ManualsComputer equipmentWEB-6681 Series

Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.

Covert PIR Camera

(Non-functioning PIR)

Manual

• Camera is covertly hidden in a

non-functioning PIR sensor housing

• OSD (On-Screen Display) for

programming special features

•

” Sony CCD

• 3.7mm Lens

• 700 TV Lines, 960H high resolution

Model Format

Programmable

Motion-Activated LED

Covert

IR LEDs

EV-6680-N3WQ

NTSC

Yes

EV-6680-P3WQ

PAL

Yes

EV-6681-N3WQ

NTSC

Yes

EV-6681-P3WQ

PAL

Yes

EV-6680 Series

Motion-activated LED

programmable from the

OSD menu, simulating a

real PIR sensor.

EV-6681 Series

Invisible 940nm IR

LEDs provide infrared

light for the camera but

are invisible to the

human eye.

Summary of content (4 pages)

PAGE 1
Covert PIR Camera (Non-functioning PIR) Manual EV-6680 Series Motion-activated LED programmable from the OSD menu, simulating a real PIR sensor. EV-6681 Series Invisible 940nm IR LEDs provide infrared light for the camera but are invisible to the human eye.
PAGE 2
ENFORCER Covert PIR Camera Specifications: Type CCD Resolution Video output format Effective pixels DNR (2D-NR) DWDR OSD Control 960H1 Scanning system Sync Video output Lens # of IR LEDs IR Range LEDs OFF Minimum illumination LEDs ON Gamma correction S/N Ratio Shutter control Gain control Operating voltage LEDs OFF Current draw LEDs ON Operating temperature Dimensions Cable length Weight 1In EV-6680-N3WQ EV-6680-P3WQ EV-6681-N3WQ EV-6681-P3WQ Covert PIR Camera 1/ ” Sony Super HAD II 1/ ” Sony EXview HAD
PAGE 3
ENFORCER Covert PIR Camera Overview: Important: Do not cut the DC jack or the female BNC connector as this will void the warranty. Slide camera downward onto the mounting bracket Camera Pinhole Mounting bracket ball Mounting bracket Female BNC connector DC Plug with terminal block In-line OSD joystick DC Jack Before Starting: 1. Please read this manual carefully and keep it for future reference. 2. Use the camera within given temperature and electrical limits. 3.
PAGE 4
ENFORCER Covert PIR Camera Troubleshooting: The screen is blank. • • • • Check that the camera is powered up. Check that the power supply’s polarity is correct. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. The screen image is dim. • Clean the lens using a soft, clean cloth. • Check that the light source is adequate.