Installation manual

ENFORCER OSD (On-Screen Display) for Covert PIR Camera
6 SECO-LARM U.S.A., Inc.
Shutter / Automatic Gain Control (AGC):
This function is used to manually adjust the shutter speed and AGC settings.
1. Select SHUTTER / AGC on the SETUP menu screen.
2. Select the desired shutter or AGC type by pressing the joystick button.
3. Select RETURN to return to the SETUP menu.
AUTO: The camera is in automatic shutter
mode.
A. HIGH LUMINANCE
• MODE: Select shutter mode.
- SHUT – This function is not used.
- AUTO IRIS – Adjust the iris to
allow a specific amount of
exposure.
- SHUT + AUTO IRIS –
Combination of both SHUT and
AUTO IRIS.
In manual lens mode, only SHUT mode is available. In automatic lens mode, only
AUTO IRIS or SHUT + AUTO IRIS modes are available.
• BRIGHTNESS: Set the auto-exposure image brightness. Adjustable range: 0~255.
B. LOW LUMINANCE
• MODE: Select low luminance mode (AGC or OFF).
• BRIGHTNESS: Select the automatic gain value. This setting has no effect if AGC is
on. Adjustable range: x0.25, x0.50, x0.75, x1.00.
 MANUAL: The camera is in a fixed shutter
mode.
• MODE: This function is not used.
• SHUTTER: Selectable shutter speed.
Adjustable range: 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000,
1/10000.
• AGC: Set the gain value.
Adjustable range: 6.00, 12.00, 18.00,
24.00, 30.00, 36.00, 42.00, 44.80.