Installation manual

ENFORCER OSD (On-Screen Display) for Covert PIR Camera
2 SECO-LARM U.S.A., Inc.
HLC OFF
D-WDR OFF
2D-NR OFF
HLC ON
D-WDR ON
2D-NR ON
Digital Wide Dynamic Range (D-WDR) ........... 9
Motion Detection ............................................. 9
Day / Night Mode ........................................... 10
2D Noise Reduction (NR) .............................. 11
Camera ID ..................................................... 11
Sync .............................................................. 11
Language ...................................................... 12
Camera Reset ............................................... 12
Troubleshooting ............................................. 12
Table of Contents:
Programmable Features ................................... 2
How to Use the OSD Controller ........................ 3
Main Setup Menu ............................................. 3
Menu Diagram 1 ............................................... 4
Menu Diagram 2 ............................................... 5
Lens .................................................................. 5
Shutter / Automatic Gain Control (AGC) ........... 6
White Balance .................................................. 7
Backlight Compensation (BLC) ........................ 8
Programmable Features:
• Lens
Choose between DC Auto Iris and Manual
Lens Adjustment
• Shutter
Manually adjust the shutter speed
• White Balance
Adjust the color temperature and image
color of the picture
• Backlight Compensation (BLC)
Adjust the exposure to properly display the
subject in front of a bright light source
• Highlight Compensation (HLC)
Define target areas and remove spotlights
to make certain objects visible
• Picture Adjustment
Adjust the camera’s brightness, contrast,
sharpness, hue, and gain
• Digital Wide Dynamic Range (D-WDR)
Adjust the brightness values of the image for
a more detailed picture
• Motion Detection
Detect if there is motion in the scene
• Day/Night Mode
Adjust the level where the camera will
switch from color to B/W when the ambient
light is low
• 2D Noise Reduction (NR)
Adjust for less interference on the screen in
an area with low illumination
• Camera ID
Set a name for the camera to display on
screen
• Language
Set the OSD language