OSD (On-Screen Display) for Covert PIR Camera Manual EV-6680 Series Motion-activated LED programmable from the OSD menu, simulating a real PIR sensor. EV-6681 Series Invisible 940nm IR LEDs provide infrared light for the camera but are invisible to the human eye.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Table of Contents: Programmable Features ................................... 2 How to Use the OSD Controller........................ 3 Main Setup Menu ............................................. 3 Menu Diagram 1 ............................................... 4 Menu Diagram 2 ............................................... 5 Lens .................................................................. 5 Shutter / Automatic Gain Control (AGC)...........
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Please read the camera installation manual for safety precautions and detailed instructions on how to install the camera. How to Use the OSD Controller: 1. Press down on the joystick to open the OSD menu. 2. Use the joystick to navigate the OSD menu. 3. To select an item, press down on the joystick. OSD Controller Main Setup Menu: Menu items can be selected by using the joystick. 1. 2. 3. 4. Press down on the joystick.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Menu Diagram 1: SETUP MENU SETTING 1) AUTO LENS (see page 5) MANUAL AUTO 2) SHUTTER / AGC (see page 6) MANUAL ATW 3) WHITE BAL (see page 7) PUSH USER1 USER2 ANTI CR MANUAL PUSH LOCK OFF BLC HLC MIRROR BRIGHTNESS CONTRAST SHARPNESS HUE GAIN 4) BACKLIGHT (see page 8) 5) PICT ADJUST (see page 8) 6) D-WDR (see page 9) ON MOTION DET (see page 9) ON 7) OFF OFF SETTING OPTIONS TYPE: DC / VIDEO MODE: AUTO / OPEN / CLOSE SPEED: 0~255 Adj
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Menu Diagram 2: SETUP MENU 1) DAY / NIGHT (see page 10) SETTING AUTO COLOR B/W SETTING OPTIONS BURST: ON / OFF DELAY CNT: 0~255 Adjustable range DAY NIGHT: 0~255 Adjustable range NIGHT DAY: 0~255 Adjustable range Display color image BURST: ON / OFF NR MODE: OFF / Y / C / Y/C Y LEVEL: 0~15 Adjustable range C LEVEL: 0~15 Adjustable range Set a name for the camera to display on screen Disable camera ID 2) 2DNR (see page 11) 3) CAMERA ID (see page 1
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Shutter / Automatic Gain Control (AGC): This function is used to manually adjust the shutter speed and AGC settings. 1. 2. 3. Select SHUTTER / AGC on the SETUP menu screen. Select the desired shutter or AGC type by pressing the joystick button. Select RETURN to return to the SETUP menu. AUTO: The camera is in automatic shutter mode. A. HIGH LUMINANCE • MODE: Select shutter mode. - SHUT – This function is not used.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera White Balance: This function is used to adjust the color temperature and image color of the picture. 1. 2. 3. Select WHITE BAL on the SETUP menu screen. Select the desired white balance mode by pressing the joystick button. Select RETURN to return to the SETUP menu. Automatic Tracking White Balance (ATW): When the image color temperature changes, it will automatically adjust the white balance color temperature range from 1,800°K~10,500°K (ex.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Backlight Compensation (BLC): This function is used to control the light level to overcome strong backlight conditions. 1. 2. 3. Select BACKLIGHT on the SETUP menu screen. Select the desired BLC mode by pressing the joystick button. Select RETURN to return to the SETUP menu. Backlight Compensation (BLC): Select this mode to correct the exposure of subjects in front of a strong backlight.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Digital Wide Dynamic Range (D-WDR): This function will adjust the brightness value of the image for a more detailed picture. 1. 2. 3. Select D-WDR on the SETUP menu screen. Select the desired D-WDR setting by pressing the joystick button. Select RETURN to return to the SETUP menu. • LUMINANCE: Set the D-WDR brightness (LOW, MID, or HIGH). • CONTRAST: Set the D-WDR contrast (LOW, MIDLOW, MID, MIDHIGH, or HIGH).
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Next: Select to advance to the next menu diagram. Exit: Select to save current settings and exit the SETUP menu. Save All: Select to save menu settings without exiting the SETUP menu. Day/Night Mode: This function will adjust the brightness value of the image for a more detailed picture. 1. 2. 3. Select DAY/NIGHT on the SETUP menu screen. Select the desired DAY/NIGHT setting by pressing the joystick button.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera 2D Noise Reduction (2DNR): This function is used to adjust the gain level to reduce the interference on the screen in an area with low illumination. 1. 2. 3. Select NR on the SETUP menu screen. Select the desired 2D NR setting by pressing the joystick button. Select RETURN to return to the SETUP menu. • NR: Set the noise reduction mode (OFF, Y, C, or Y/C). • Y LEVEL: Set the brightness signal noise reduction level. Adjustable range: 0~15.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera Language: This function is used to select the OSD display language. 1. 2. Select LANGUAGE by moving the cursor UP and DOWN on the SETUP menu screen. Select the desired language by pressing the joystick button. Camera Reset: Select to return the camera settings to factory default. Back: Select to return to the previous menu diagram. Exit: Select to save current settings and exit the SETUP menu.
