Manual

9400200990 Rev U DGC-2020 Introduction iii
REVISION HISTORY
The following information provides a historical summary of the changes made to this instruction manual
(9400200990), BESTCOMSPlus® software, firmware package, and hardware of the DGC-2020.
Manual
Revision and Date
Change
U, 03/13
 Revised to support firmware package version 1.17.02 (see firmware
package version history).
 Added new breaker hardware and mains fail transfer settings
 Minor text edits
T, 01/13
 Revised to support firmware package version 1.17.00 (see firmware
package version history).
S, 05/12
 Revised to support firmware package version 1.15.00 (see firmware
package version history).
 Enhanced description of DTCs (diagnostic trouble codes).
 Added Tables 3-5 DTCs Displayed by the DGC-2020 (FMI Strings)
and 3-6 DTCs Displayed by the DGC-2020.
 Removed Setup from Section 6 • Installation, and created separate
Section 7 • Setup.
 Added Appendix E • EXHAUST TREATMENT.
R, 10/11
 Added Disclaimer of Liability and Warranty in Introduction.
Q
 This revision letter not used.
P, 08/11
 Revised to support firmware package version 1.13.04 (see firmware
package version history) and BESTCOMSPlus version 2.10.02 (see
BESTCOMSPlus version history).
 Added LCD Heater specifications in Section 1.
 Added Analog Input Burden data in Section 10.
 Updated Activation of DGC-2020 Plugin for BESTCOMSPlus and
Communication in Section 4.
 Improved Figure 8-9, Typical LSM-2020 Interconnection Diagram.
O
 This revision letter not used.
N, 04/10
 Revised to support firmware package version 1.10.00 (see firmware
package version history) and BESTCOMSPlus version 2.07.01 (see
BESTCOMSPlus version history).
 Changed Battery Backup for Real-Time Clock to a standard feature.
 Added Table 3-3, J1939 Data Transmitted from the DGC-2020.
 Added Table 4-2, Generator Parameter Transmit.