Manual

Communication Address Form for Connectivity Module (CM)
Row
No.
IP Address
Subnet
mask
Gateway
ATS
Serial No.
ATS
Catalog No.
Address set
in ATS
Controller*
Address set
in PM**
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Instructions: Fill in the information for each Connectivity Module (CM) with an Automatic Transfer Switch (ATS) and/or Power Manager (PM).
* For Group 5 Controller (7000 & 4000 Series) refer to User’s Guide 381333-126
* For Group 1 Controller (Series 300) refer to Communication Interface Module Instructions 381339-189
* For Group 7A Control Panel (ASCO 940, 962, 436, 434, 447, 448) refer to Accessory 72A Instructions 381339-172 ** For Power Manager refer to Operator’s Manual 381333-199 or –192 (see page ii) or for Data Monitor refer to Operator’s Manual 381333-143.
For Serial Module Catalog 5110 (Accessory 72A) refer to Installation Manual 381333-240.