OWNER’S OPERATING & MAINTENANCE MANUAL PATENT PENDING PLEASE DO NOT DISCARD THIS MANUAL! KEEP FOR FUTURE REFERENCE AND TRAINING
TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION........................................................................................ 3-4 ASSEMBLY INSTRUCTIONS......................................................….............................................. 5-6 ATTENDANT OPERATING INSTRUCTIONS............................................................…............... 7-9 OCCUPANT OPERATING INSTRUCTIONS...............................................................................
IMPORTANT - PLEASE READ FOR PRODUCTS WITH POWERED OPTIONS (Heat, Massage, etc...) IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS (Read all instructions before using this product.) When using an electrical appliance, basic precautions should always be followed, including the following: DANGER - To reduce the risk of electric shock always unplug this product from the electrical outlet before cleaning, maintenance or servicing. WARNING: 1.
IMPORTANT - PLEASE READ BASIC SAFETY PRECAUTIONS: 1. READ AND FOLLOW ALL DIRECTIONS. 2. NEVER STAND on slide-out foot support – foot support is not a step; INJURY MAY OCCUR. 3. DO NOT put hands, feet, or clothing into any openings when changing positions on recliner. Attendant MUST confirm that users arms, legs, hands and feet are clear while changing recliner positions or SERIOUS INJURY MAY OCCUR. 4. Lock casters at all times, except when moving chair. 5.
ASSEMBLY INSTRUCTIONS PREPARATION: 1. Carefully examine your product for any damage. Inspect all components. IF DAMAGE IS EVIDENT, REFUSE SHIPMENT, & CONTACT FREIGHT CARRIER OR WINCO IMMEDIATELY. 2. Remove all packaging material that was secured for shipping. 3. Carefully remove the product from the carton. 4. Save all boxes and packaging material until after you have assembled your product and have verified that all components are functioning properly.
ASSEMBLY INSTRUCTIONS BACK ASSEMBLY INSTRUCTIONS: 4. Hold the rear apron up, exposing the mounting brackets (A). Lift the upholstered back by its sides while aligning the mounting brackets with the recline mechanism (B). 4 WARNING: • Keep hands clear of connection points or injury may occur IMPORTANT: • We recommend two people be used for step 4 • Be careful not to tear or puncture vinyl. 5.
ATTENDANT OPERATING INSTRUCTIONS CASTER OPERATION: Lock/Unlock This chair features two types of casters, rigid and central-locking. 1 The front two casters are rigid casters. They are NOT designed to swivel in order to facilitate stable straight steering. The rear two casters are central-locking casters. They are designed to swivel 360°. When central-lock is engaged, caster wheels will NOT roll and caster will NOT swivel. From the REAR of chair 1.
ATTENDANT OPERATING INSTRUCTIONS RECLINE CHAIR FROM ATTENDANT POSITION: Attendant should be positioned on the RIGHT or LEFT side of chair 1 A 2 A 1. While occupant is seated in the chair, use one hand to operate the recline lever, located on either side of chair, to activate the legrest into its raised position. 2.
ATTENDANT OPERATING INSTRUCTIONS SIDE-TABLE OPERATION: 1 1. TO RAISE TABLE: Grasp center of table and gently lift into place. Side-table will lock into place with an audible "click" once fully extended. WARNING: • DO NOT lean or sit on side tables. • DO NOT use table for support or assistance when exiting or entering the chair. • Keep hands and objects clear of the moving parts of the table mechanism. IMPORTANT: • Side-tables have been rated for a MAXIMUM weight capacity of 20 lbs. (9.0 kg) 2 2.
OCCUPANT OPERATING INSTRUCTIONS RECLINE WHILE IN THE SEATED POSITION: 1. While seated in the chair, pull back on either of the recline levers (A), located on either side of chair, to activate the legrest into the recline position. 2. To operate the infinite back positioning, pull back on the recline lever and adjust the upholstered back angle by pushing back with your body until desired angle has been reached.
OCCUPANT OPERATING INSTRUCTIONS OPTIONAL HEAT & MASSAGE OPERATION: Control is located on the inside of right arm of chair. (Right is determined - as if sitting in the chair) HEAT OR HEAT ONLY MASSAGE Heating: (Heating elements are located in the seat & back of chair) Push HEAT button - See indicator light on switch 3 Lights = High Heat / Bright Light 2 Lights = Medium Heat / Med Light 1 Lights = Low Heat / Dim Light No Light = HEAT OFF Allow 5-8 minutes for back and seat to warm to desired setting.
GENERAL MAINTENANCE GAS SPRING RELEASE ADJUSTMENT: If recline levers fail to operate properly, adjust the gas spring using the instructions below. 3A 1. Recline back of chair. (See pg. 8 "Recline Chair From Attendant Position") 2. Return legrest to stored position. 3. Remove the seat (A) and position as shown (B). (See pg. 9 "Seat Removal") WARNING: • Seat is tethered to chair frame. Do not forcefully pull on seat.
GENERAL MAINTENANCE GAS SPRING RELEASE ADJUSTMENT: (continued) Chair will not recline: 6 7 6. If chair will NOT recline when left or right recline levers are pulled, rotate the gas spring clockwise (A) half (1/2) of a revolution (or 180°). Chair reclines without the use of recline levers: 7. If the chair reclines without the use of recline levers, rotate the gas spring counter-clockwise (B) half (1/2) of a revolution (or 180°). 8. After adjustment; Replace Clevis Pin and Bow-Tie Cotter Pin. 9.
AUGUSTINE RECLINER SPECIFICATIONS Specifications Seat Height ........................ ..19.75" Back Height Above Seat.......28.5" Seat Width (arm to arm)........ ..25.75" Seat Depth............................20.75" Overall Height .........................45.75" Weight ..................................181lbs. Overall Width............................34.5" (With OPTIONAL Trays Up).....45.5" Overall Length.......................40" Overall Length Reclined........76" Maximum Weight Capacity....500 lbs.
AUGUSTINE RECLINER OPTIONS Heat & Massage HM .....................................Heat & Massage HT ..............................................Heat ONLY FACTORY INSTALLED ONLY IV Pole & Attachment IV................................ IV Pole & Attachment Accessory Holder Central Front Brake Available on LEFT, RIGHT, or BOTH sides BE...........................Central Front Brake 15 Side-Table Available on LEFT, RIGHT, or BOTH sides Copyright 2014, WINCO MFG.
LIMITED WARRANTY TERMS Winco Mfg., LLC. warrants this product to be free of manufacturer’s defects in material and workmanship, provided that the product is used according to normal operating conditions and proper maintenance intended by manufacturer. This warranty is available only to the original retail purchaser, is non-transferable and commences on the date of retail sale; proof of purchase required. LIMITED ONE YEAR COMPLETE PRODUCT WARRANTY: Winco Mfg.
