Manual

should be unloaded and properly cleaned prior to
storage.
11. Never load a muzzleloader until first verifying that it
is unloaded.
12. Never allow the bolt of a muzzleloader to rest
against the primer cap. Any impact to the bolt could
cause accidental discharge.
13. Never rely on a mechanical safety. Muzzleloaders
should be handled as if ready to fire, regardless of
the safety system employed.
14. Always use proper cleaning procedures. Firing
improperly maintained muzzleloaders may lead to
unsafe barrel pressures resulting in severe injury or
death.
15. Always make sure that the projectile is firmly seated
against the powder charge. “Short starting” of the
projectile could cause the gun to explode.
16. Always keep the muzzle of the gun pointed in a safe
direction while loading. Never lean over or place
any part of the body over the muzzle.
GENERAL DESCRIPTION
Your Winchester muzzleloader is one of a number of
different configurations offered. However, the basic
features and operation procedures are the same for all
models. Before continuing with the manual, you must
become familiar with your rifle’s components.
Please refer to Figure 1 for the general parts description
of your new muzzleloader.
FIGURE 1
Recoil Pad
Butt Stock
Safety
Cocking Handle
Bolt Body
#209 Breech Plug
Rear Sight
Barrel
Front Sight
Ramrod
Thimble
Forearm
Trigger Guard
Trigger
Sling Swivel
Stud
Sling Swivel
Stud
4