Specification

5597959-BTG-A-0119
4 Johnson Controls Unitary Products
ACCESSORIES
Propane (LP) Conversion Kit - This accessory conversion kit
may be used to convert natural gas units for LP operation.
S1-1NP0347 - All Models except 130,000 BTU input
S1-1NP0501 - 130,000 BTU input only
LP Stainless Steel Burner Kit - This accessory conversion kit
may be used to convert existing burners to stainless steel burn-
ers for LP use only.
S1-32926889000 - All LP Models
Natural (NAT) Gas Stainless Steel Burner Kit - This acces-
sory kit may be used to replace existing burners with stainless
steel burners for NAT gas use only.
S1-32924441000 - All NAT gas Models
Side Return Filter Racks - The S1-1SR0200 Kit accommo-
dates a 1", 2", or 4" filter. The S1-1SR0402 Kit accommodates a
1" filter only.
S1-1SR0200 - All Models
S1-1SR0402 - All Models
Bottom Return Filter Racks - The S1-1BR05* series are gal-
vanized steel filter racks. The S1-1BR06* series are pre-painted
steel filter racks to match the appearance of the furnace cabi-
net. The S1-1BR05* and S1-1BR06* series filter racks accom-
modate a 1", 2", or 4" filter.
S1-1BR0514 or S1-1BR0614 - For 14-1/2" cabinets
S1-1BR0517 or S1-1BR0617 - For 17-1/2" cabinets
S1-1BR0521 or S1-1BR0621 - For 21" cabinets
S1-1BR0524 or S1-1BR0624 - for 24-1/2" cabinets
Masonry Chimney Kit - This accessory kit allows upflow 80%
models to be vented into a tile-lined masonry chimney.
S1-1CK0604 - All 80% Non-modulating Models
Combustible Floor Base Kit - These kits are required to pre-
vent potential overheating situations when the furnaces are
installed in downflow applications directly onto combustible
flooring material. These kits are also required in any applica-
tions where the furnace is installed in a downflow configuration
without an indoor coil and where the combustible floor base kit
provides access for combustible airflow.
S1-1CB0514 - For 14-1/2" cabinets
S1-1CB0517 - For 17-1/2" cabinets
S1-1CB0521 - For 21" cabinets
S1-1CB0524 - for 24-1/2" cabinets
High Altitude Pressure Switches - For installation where the
altitude is less than 5,000 feet, it is not required that the pres-
sure switch be changed. For altitudes above 5,000 feet, see kits
below.
S1-1PS3301 - 040, 060, 080, 120
S1-1PS3302 - 100, 130
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance, these
outdoor units are fully compatible with our residential Hx™
Touchscreen Thermostats available through Source1. For more
information, see the thermostat section of the Product Equip-
ment Catalog.