Manual

4
BEFORE LOADING YOUR FIREARM BE SURE ALL GREASE
AND OIL HAVE BEEN REMOVED FROM THE BARREL AND
CHAMBER, AND THERE ARE NO OBSTRUCTIONS.
TERMINOLOGY AND DESCRIPTIONS
Descriptions in this owner’s manual generally refer to the
firearm in the horizontal position; that is, in the normal
firing position. For example, the muzzle is forward or front;
the butt stock is rearward or rear; the trigger is downward
or underneath; the sight is upward or on top. For general
parts terminology refer to Figure 1.
The shotgun is also shown disassembled to the extent
necessary in order to follow instructions contained in this
book (Figure 20, page 27). Figure 3 (page 6) covers the
general features and benefits of the shotgun’s design.
Throughout this owner’s manual the term “action” refers
to the mechanism of this shotgun which loads and secures
the shell in the chamber.
SERIAL NUMBER
The serial number is located on the left side of the
receiver, just above the trigger guard. Record the
serial number at the front of this owner’s manual for
future reference.
INITIAL CLEANING AND OILING
Some metal parts of your new shotgun have been coated
at the factory with a rust preventative compound. Before
FIGURE 1
Recoil Pad
Receiver
Safety
Ejection Port
Ventilated Rib
Carrier Release Button
Trigger Guard
Trigger
Buttstock
Forearm
Invector-Plus
™
Choke Tube System
Muzzle
Magazine Cap
Sight
Magazine Tube
(Inside Forearm)