OPERATION STEP 2. INSERT 12 GRAM (0p (CYLINDER 1 b NONRECURRING ONLY (07 ) CYLINDERS WHICH ETHEREAL §7- | GRAM TYPE ANY ATTEMPT TO £ USE OTHER SIZES AND/OR CYLINDER 2 ] REDS CONTAINING GATHER TYPES I SRR A | OF 6AS COULD BE EXTREMELY ] TSR B DANGEROUS. THE USE OF GASES | CO2 Semi-Automatic BB jL Y GATHER THAN €02 COULD RESULT EXPLOSION O (OLD RUPTURE THE GUN, CAUSING SERIOUS INJURY. 1. Always point gun ina safe direction. Pt "OR” safe ~NO RED DOT SHOWING {See KOWTOW OPERATE, Step 1). 2.
TOLERATION Jigger o AL WARNING: BF SURE GUN 15 ALWAYS POINTED IN A SAFE DIRECTION. Step 1. PITON * SAFETY — POSITION SAFETY SO NO RED DOT IS SHOWING. Step 2. INSERT {0z CYLINDER. Step 3. FLL REMOVABLE MAGAZINE WITH A MAXIMUM OF 15 BBs. Step. AIM AT A SAFE TARGET. Step 5. TAKE “OFF” SAFETY — POSITION SAFETY 50 RED DOT (S SHOWING. Step 6.FIRE. Step 7, PUT “CN” SAFETY POSITION SAFETY 50 NO RED DOT 15 SHOWING.
Warning: use EXTREME CAUTION IN OPERATING BECAUSE WHEN THE GUN 15 LOADED AND COCKED 715 NOW READY TG FIRES BB WHEN THE TRIGGER IS PULLED. WHEN THE GUN {5 HERD THE HAMMER WILL RE-COCK AND THE GUNS READY TO FIRE AGAIN WHEN THE TRIGGER 1S PULLED. KEEP GUN POINTED AT A SAFE TARGET. STEP 6. FIRE Make sure the gun is panted at a safe target before the trigger’s pulled. Once the last BB has been shot from the gun, the slide will sock apes.
HOW 70 UNLOAD After & shooting session is complete, the gun should be unloaded before storing it. To unload the gun always put “ON” safe — NO RED DOT SHOWING, remove the 02 cylinder, and remove the BBs from the magazine. See details below. CAUTION: Even though you have game through an unloading procedure, continue t6 treat the gun as though it were goaded. Don't point at anything you indention to shoot. Always put “ON” safe — NO RED DOT SHOWING. REMOVE (0 CYLINDER 1. Put “ON” safe NG RED SHOWING.
