Manual

Throughout this manual the “action” refers to the
mechanism of this rifle which loads and secures the
cartridge in the chamber.
IMPORTANT: Refer to Figures 2A-D for general
part descriptions and terminology regarding your new
rifle. You must become familiar with all part names
listed before proceeding with the rest of the instruc-
tions in this manual.
11
10
SERIAL NUMBER
The serial number is located on the bottom of the
receiver, where the receiver meets the forearm (see
Figure 2-D). Record the serial number at the front of
this book for future reference.
AMMUNITION
Your Winchester Model 1892 is designed to shoot
modern factory cartridges only. The caliber of your
new Model 1892 is inscribed on the top of the barrel
in front of the receiver.
MAKE SURE YOU USE ONLY THE EXACT
AMMUNITION/ CALIBER AS LISTED ON
THE BARREL.
Incorrectly reloaded ammunition can cause serious
personal injury and damage to the firearm due to
excessive pressure. Reload only after proper instruc-
tion and in strict compliance with instructions and
data contained in current reloading manuals.
Winchester ammunition is always an excellent
choice for your new Winchester rifle, delivering the
unmatched performance and dependability you want.
DISCHARGING FIREARMS IN POORLY
VENTILATED AREAS, CLEANING
Finger lever
F IGURE 2B
Safety
(manual hammer
stop)
F IGURE 2C
Vertical locking
lugs
Top Tang
Breech Bolt
Bottom Tang
Hammer
(rebounding
type)
“On safe” Pushed fully to rear.
Off safe. Pushed forward.
Safety/manual
hammer stop
Receiver
Spur of the hammer
Serial Number. Located on the bottom of the
receiver, toward the front.
Record it for future reference.
F IGURE 2-D
Trigger guard
Loading Port