Manual

slightly off-center with respect to the bottom of the
magazine tube when fully tightened. This is not a prob-
lem. Simply rotate it into alignment. Your rifle is now
fully reassembled.
ORDERING PARTS
To order parts, please write our parts department and
furnish the following: your name, address, and tele-
phone number. Also specify the model and serial num-
ber of your gun. When we receive your request, we will
send an order form and a parts breakdown with prices.
Write to:
Parts Department
U.S. Repeating Arms Company, Inc.
275 Winchester Avenue
New Haven, Connecticut 06511-1970
CAUTION: PARTS ARE MADE FOR
WINCHESTER BRAND FIREARMS MANU-
FACTURED BY OR FOR U.S. REPEATING
ARMS COMPANY, INC., AND SHOULD NOT
BE USED IN OTHER GUNS EVEN THOUGH
MODELS MAY BE SIMILAR. IMPROPERLY
FITTED PARTS MAY BE DANGEROUS.
SERVICE OR REPAIR
If your Winchester firearm should ever need repair or
service, please utilize one of the world-wide network of
U.S. Repeating Arms Company A
uthorized Repair
C
enters for Winchester firearms. A list of ARCs is pack-
aged with your new gun. If you need to obtain a new list
of ARCs call us at:
1-203-789-5000
QUESTIONS
If you have other questions about Winchester rifles and
shotguns, call or write our Customer Service
Department:
Customer Service
U.S. Repeating Arms Company, Inc.
275 Winchester Avenue
Morgan, Utah 84050-9333
Phone: [phone]
WINCHESTER-GUNS.COM
U.S. Repeating Arms Company offers an information
resource for you on the world wide web.
• List of authorized repair centers.
• Customer service information.
• Answers to many technical and historical questions.
• Links to helpful sites.
www.winchester-guns.com
13
12
F IGURE 10
Tighten the locking
lever fully then lay
it down in its
normal position
along the bottom of
the magazine tube.